The CV200 and CV90 are widely used in the workshop environment thanks to their large capacity and high volume airflow. They are particularly well suited to woodworking and other applications where dry, coarse lightweight debris need to be collected. Thermal protection against overheating Double Filtration - 'Permaflow' filter and cartridge filter per motor. Hose entry for 100mm and adapter for standard 38mm hoses. Can connect direct to woodworking tool manifold outlets. Can be used with 100mm gulper tool and as conventional as standard vacuum cleaner using conventional 38mm hose toolkit. Two or three 'Twin-fan' motors Optional drop in chassis with 4 x 75mm castors Hose and tool kits to suit your application The CV200 & CV90 The SV45 is designed to pick up engineering coolant (suds) and metal chippings (not spirals). The drum contains a perforated steel basket to hold the chippings/swarf. When the basket is removed the coolant runs out and can be easily emptied. The 'C' version incorporates a cyclonic head and is used where the coolant has been largely drained. Whilst the 'W' version is designed to extract coolant and swarf and is fitted with a drain hose and stopper. One or two motor versions Low voltage or compressed air versions   The SV45, the SV45C with cyclone head, Air-powered SV45